100G CFP
F-tone Networks CFP 100GBASE-LR4 / CFP 1000GBASE-ER module supports a link length of 10, 20, 25, 40km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths.

100G CFP ER4
ER4 CFP transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 40km of single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba.The optical transceiver is RoHS compliant.

100G CFP LR4 Optical Transceiver：100G CFP LR4光模塊支持100GbE和OTU4數據在10km單模光纖上的傳輸,采用4個EML激光器和PIN接收器組成和波分復用技術將4路不同波長復用在一根光纖上傳送，該光模塊符合 CFP MSA和IEEE 802.3ba* 100GBASE-LR4。可通過MDIO進行數字監控功能。

功能特性

100G CFP Optical Transceiver Module

100G CFP SR10光模塊（400m）

北億纖通（F-tone Networks）100G CFP SR10光模塊（400m）專為100G以太網100GBASE-SR10設計,可連接多個850nm多模光纖.

100G CFP to QSFP28 Adapter：北億纖通100G CFP to 100G QSFP28 Adapter轉接器實現CFP接口（10X10Gbps）與QSFP28接口（4X25Gbps）雙向轉換，滿足IEEE 802.3ba 100GBASE-LR4和IEEE 802.3bm 100GBASE-SR4協議，最大功耗低于4W，支持前向糾錯編碼（FEC）、數字診斷（DDM）功能。為100G以太網和電信網提供高性能、熱插拔互聯方案。 經驗證，采用100m OM4多模光纖進行傳輸，該模塊實測功耗低于2.3W，并成功實現4小時連續工作零誤碼。

100G CFP4 SR4，P/N: CFP4-SR4，在OM3多模光纖上最長傳輸距離為100m
100G CFP4 LR4，P/N: CFP4-LR4，在單模光纖上最長傳輸距離為10km
100G CFP4 ER4，P/N: CFP4-ER4，在單模光纖上最長傳輸距離為30km
此外，F(xiàn)-tone Networks還將于2015年推出25G SFP28 AOC、SR 和 LR Lite 產品。

Field proven installations;Cost-Per-Bit reduction by enabling X10 capacity on a single wavelength;Reduce CEPAX by enabling deployment of un-compensated networks (Green field);Cost effective utilization of congested 10G networks (Brown field);Single 100G carrier cost effective utilization of congested networks;Robust coherent transmission;Low OSNR Tolerance achieved by built in SD-FEC

100G-CFP-10
100G-CFP-10 is Multi-Vendor MSA Compatible 100GBASE-LR4 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology.

100G-CFP-40
100G-CFP-40 is Multi-Vendor MSA Compatible 100GBASE-ER4 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology. 

100GBASE-LR4 10km Gen2 CFP Optical Transceiver
100GE CFP optical transceiver modules are designed for use in 100 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and Application Note AN-2080. 

100GBASE-LR4 CFP 10kmOptical Transceiver

Unique solution enabling implementation of a single carrier 200G module or 2 x 100G CFP modules on a single line-card design;Best available spectral efficiency in the market for 50GHz spacing;Unique slim design - enabling single slot implementation;Utilizing standard CFP host interface

F-tone’s CFP-40GNRZ-VSR 40G CFP transceiver modules are designed for use in 40 Gigabit links required for router to router client side applications or uplink interconnections to transport networks. Designed to enable optical compatibility with existing carrier client interfaces VSR2000-3R2 per ITU-T G.693, they are compliant with the CFP MSA, IEEE 802.3bg 40GBASE-FR and OTU3 requirements specified in ITU-T G.709. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC.

F-tone CFP 100GBASE-LR4 module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

F-tone Electrical Loopback CFP CFP-XLB-XX is used for testing CFP transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for CFP port testing. CFP-XLB-XX is packaged in a standard MSA housing compatible. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host.

CFP Dual 40GBASE-SR4 / OTU3 Parallel Optical Module:pictureDesigned to support the IEEE 40GBASE-SR4 link specification; the newly developed F-tone Dual 40G CFP transceiver offers 2 independent 40G Ethernet links in one CFP slot. The F-tone CFP transceiver has two MPO ports which connect to industry standard 12-fiber multi-mode fiber cable. Both MPO ports will inter-operate with equipment using 40GBASE-SR4 QSFP transceivers.

F-tone 100/40G CFP test board is designed to provide an efficient and easy method of programming and testing 40/100G CFP modules. It comes with comes with complete operations software and user manual to enable intuitive testing. Host board is electrically transparent as maximum, allowing a more accurate assessment of the modules' performance.

• Transmission data rate up to 11.2Gbit/s per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
• Up to 11.2 Gbps per channel bandwidth,
• OTU4 compatible
• 10 channels 850nm VCSEL array
• 10 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0°C to +70°C
• 3.3V power supply
• RoHS 6 compliant(lead free)